Huawei UPS5000-A - Preparing Power Cables

Heat-shrink
tubing
Insulation tape
- -
Other Tools
Electrician's knife Hacksaw Powder marker Glue gun
Brush Paint brush Vacuum cleaner Flashlight
Hole saw
Insulation pad
SPD extracting
tool
Internal resistance
tester
4.1.3 Preparing Power Cables
NO TICE
● The UPS can generate large leakage currents. A circuit breaker equipped with
an RCD is not recommended.
● If multiple UPSs are to be connected in parallel, input and output power cables
for each UPS should have the same length and specications.
UPS5000-A-(30 kVA-120 kVA)
User Manual 4 Installation and Cable Connection
Issue 17 (2024-02-21) Copyright © Huawei Digital Power Technologies Co., Ltd. 65