UPS5000-E-(50 kVA-300 kVA)
User Manual (50 kVA Power Modules)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 3-62 Removing the cover
Figure 3-63 Copper bar positions
(1) Battery input terminals
(+, N, –)
(2) Bypass input terminals
(2L1–2L3, N)
(3) Mains input terminals
(1L1–1L3, N)
(4) Output terminals (U, V,
W, and N)
(5) Maintenance bypass
switch
Step 2 Determine the cabling mode.
Remove small covers for routing cables.
Take out the cable cover for signal cables, and remove small covers from the bottom
based on site requirements, as shown in Figure 3-64.
To Next Page
Loading...
