Huawei UPS5000-E-200K-SM - Page 201

UPS5000-E-(50 kVA-300 kVA)
User Manual (50 kVA Power Modules)
4 User Interface
Issue 02 (2017-02-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
192
Figure 4-93 Buttons after one event is expanded
Table 4-8 Buttons after one event is expanded
No.
Name
Description
1
Button for modifying
A dialog box for modifying
a job is displayed after you
click this button. You can
modify the job.
2
Button for deleting one job
You can delete the job by
clicking this button.
3
Button for test
If you click this button, the
job will be performed and a
message showing test
succeeds or fails will be
displayed on the page.
Adding one job for one event: Select one event (for example, Inverter on), click the button
for adding one job, and the page for adding a job for the event is displayed.
When adding a job, the job types to be selected are: RCCMD Shutdown, RCCMD Message,
RCCMD Execute, and RCCMD TRAP. RCCMD Shutdown is selected by default. For
different job types, you need to enter different contents.