SR05-D1A3-PV manual v1801 12/83
Table 1.1.1 Ordering codes for the versions of model SR05
VERSIONS OF SR05 (part numbers), without cable
SR05-D1A3-PV
digital second class pyranometer, with Modbus over
RS-485 output, alternative for PV reference cell
SR05-D1A3-PV-BL
digital second class pyranometer, with Modbus over
RS-485 output, alternative for PV reference cell, with ball
SR05-D1A3-PV-TMBL
digital second class pyranometer, with Modbus over
RS-485 output, alternative for PV reference cell, with tube
SR05-D1A3
digital second class pyranometer, with Modbus over
digital second class pyranometer, with Modbus over
RS-485 and 0-1 V output, with ball levelling
digital second class pyranometer, with Modbus over
RS-485 and 0-1 V output, with tube mount on ball
digital second class pyranometer, with Modbus over TTL
and 4-20 mA output
SR05-D2A2-BL
digital second class pyranometer, with Modbus over TTL
and 4-20 mA output, with ball levelling
SR05-D2A2-TMBL
digital second class pyranometer, with Modbus over TTL
and 4-20 mA output, with tube mount on ball levelling
SR05-A1
analogue second class pyranometer, with millivolt output
SR05-A1-BL
analogue second class pyranometer, with millivolt output,
analogue second class pyranometer, with millivolt output,
with tube mount on ball levelling
CABLE FOR SR05, with female M12-A connector at sensor end, non-stripped on other end
‘-03’ after SR05 part number
standard cable length: 3 m
‘-10’ after SR05 part number
‘-20’ after SR05 part number
CABLE EXTENSION FOR SR05, with male and female M12-A connectors
An extension cable (with connector pair) can be used in combination with a regular cable
(with one connector at sensor end) to make alternative SR05 cable lengths possible.
Example: Cable length needed: 15 m. In this case, it is easiest to buy SR05 with a 20 m
cable and to cut it to desired length.
Example: Cable length needed: 30 m. In this case, it is easiest to buy SR05 with 10 m
cable and a cable extension of 20 m.
To Next Page
Loading...