SR05-D1A3-PV manual v1801 21/83
Table 3.1.1 Specifications of SR05-D1A3-PV (started on previous pages)
Ball levelling mountable on (non-)horizontal surfaces
with angle compensation up to 10 °; retrofittable; one
shim, two M5x20 mounting bolts and two M5 nuts
included; requires 4 mm hex key for levelling and 4
mm hex key and 8 mm wrench for mounting
Tube mount with ball levelling
mountable on tubes Ø 25 to Ø 40 mm
with angle compensation up to 10 °; retrofittable;
one shim, two M5x30 and two M5x40 mounting bolts
included;
requires 4 m hex key for levelling and mounting
Alternative pyranometer mounting
for mounting any Hukseflux pyranometer on
horizontal and vertical tubes, on platforms, both
horizontal and in Plane of Array
order code = PMF01
PMF01 is compatible with SR05 ball levelling
Adapted transmitted range 0 to 1 V
can be adjusted at the factory upon request
To Next Page
Loading...