Hukseflux SR05 series - Page 34

SR05-D1A3-PV manual v1801 34/83
defined state when no transmission is occurring, a pull up and pull down resistor are
recommended. Typical values for both resistors are in the range from 650 to 850 Ω.
Figure 5.8.1.2 Connection of SR05-D1A3-PV to an RS-485 network. SR05-D1A3-PV is
powered by an external power supply of 5 to 30 VDC.
shield
[+] 5 to 30 VDC
[-
]
5 to 30 VDC
common
[+] data
[ -
]
data, RS-485 A / A’
SR05-D1A3-PV wire
black
grey
white
blue
yellow
brown
, RS-485 B / B’
RS-485 network
not connected