9(Off): Press this button to turn off the entire
climate control system. Outside air will still
enter the vehicle, and will be directed to the floor.
This direction can be changed by pressing the
mode button. The temperature can also be
adjusted using either temperature knob. Press the
up or down arrows on the fan switch, the defrost
button, the AUTO button, or the air conditioning
button to turn the system on when it is off.
Manual Operation
You may manually adjust the air delivery mode or
fan speed.
w9x(Fan): The switch with the fan symbol
allows you to manually adjust the fan speed. Press
the up arrow to increase fan speed and the
down arrow to decrease fan speed.
Pressing this button when the system is off will
turn the system on.
C(Mode): Press this button to manually
change the direction of the airflow in your vehicle;
repeatedly press the button until the desired
mode appears on the display.
If you press the mode button to select an air
delivery mode, the display will change to show you
the selected air mode delivery. The display will then
show the current status of the system. When the
system is turned off, the display will go blank after
displaying the current status of the system.
H(Panel): This setting will deliver air to the
instrument panel outlets.
)(Bi-Level): This setting will deliver warmer air
to the floor and cooler air to the instrument
panel outlets.
6(Floor): This setting will deliver air to the
floor outlets.
-(Defog): See “Defogging and Defrosting” later
in this section.
@(Recirculation): Press this button to limit the
amount of outside air entering your vehicle. The
light on the recirculation button will glow. This is
helpful when you are trying to limit odors entering
your vehicle and for maximum air conditioning
performance in hot weather. Press this button again
to allow outside air to enter the vehicle. The light on
the recirculation button will go off.
200
To Next Page
Loading...
