Pressing this button also cancels the auto
recirculation feature. To resume the auto
recirculation function, press the AUTO button.
Each time the vehicle is started, the system will
revert to the auto recirculation function.
If you select recirculation while in defrost, defog or
floor, the light in the button will flash and then go out
to let you know that this is not allowed. This is
normal and helps to prevent fogging.
When the weather is cool or damp, operating the
system in recirculation for extended periods of time
may cause fogging of the vehicle’s windows. To
clear the fog, select either defog or front defrost.
You may also notice that the A/C compressor will
run while in recirculation mode. This is normal and
helps to prevent fogging.
9(Off): Press this button to turn off the entire
climate control system. Outside air will still enter the
vehicle, and will be directed to the floor. This
direction can be changed by pressing the mode
button. The temperature can also be adjusted using
either temperature knob. Press the up or down
arrows on the fan switch, the defrost button, the
AUTO button, or the air conditioning button to turn
the system on when it is off.
Display
If you press the MODE button to select an air
delivery mode, the display will change to show you
the selected air delivery mode. After ten seconds,
the display will change to show the driver
temperature setting and the selected mode.
If you press the up or down arrows on the fan
switch, the display will change to show the
selected fan speed. After ten seconds, the display
will change to show the driver temperature
setting and the selected mode.
Whenever you press AUTO, the display will
change to show the following:
• the current driver’s set temperature and an
arrow for five seconds,
• the current passenger’s set temperature
setting and an arrow for five seconds and
• the automatic air delivery mode and fan speed.
If the driver’s and passenger’s temperature settings
are the same when AUTO is pressed, the
temperature setting and both arrows will be
displayed for five seconds along with the automatic
air delivery mode and fan speed. After the
five second update, the display will change to show
the temperature setting, both arrows and AUTO.
201
To Next Page
Loading...
