Humminbird Matrix 97 - Units - Depth; Units - Temp (International Only); Units - Distance

65
Units - Depth
Units - Depth selects the units of measure for all depth-related
readouts.
To change the Units - Depth setting:
1. Highlight Units - Depth on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Depth setting.
(Meters [International Models Only], Feet, Fathoms; Default is Meters for International
models, and Feet for Domestic models)
Units - Temp
(International Only)
Units - Temp selects the units of measure for all temperature-related readouts. International
Models Only.
To change the Units - Temp setting:
1. Highlight Units - Temp on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Temp setting.
(Celsius, Fahrenheit; Default = Celsius)
Units - Distance
Units - Distance selects the units of measure for all distance-
related readouts.
To change the Units - Distance setting:
1. Highlight Units - Distance on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Distance setting.
(Domestic Models: Statute Miles, Nautical Miles; Default = Statute Miles; International
Models: Meters/Kilometers, Meters/Nautical Miles, Feet/Statute Miles, Feet/Nautical
Miles; Default = Meters/Kilometers)