Hunter Douglas Paramount - Side Stack Blinds Operation

OPERATION
14
PermAssure
®
Safety Wand
■ Push or pull the wand to open or close the vanes (black arrows).
NOTE: Please do not bow the wand. Hold the wand at a 45˚ angle. Push or pull the wand
to open or close the vanes.
■ Twist the safety wand to open or close the vanes (gray arrows).
IMPORTANT: Do not over torque the wand. It can cause the louvers to kick out at the
bottom of the blind and cause the louvers to look misshapen.
Side Stack Blind Operation
PermaTilt
®
Wand Control
NOTE: Cord length and/or tension cannot be adjusted for
PermaTilt
®
Wand Control System. It is set in the factory to help
ensure that the product meets cord safety standards.
■ Tilting. (gray arrows) When tilting your vanes use one
hand to hold the tether to keep it from moving, while
turning the wand handle with your other hand. This
prevents the tensioned cord from twisting.
■ Traversing. (black arrows) When traversing your vanes
use one hand to hold the tether to keep it from moving,
while pulling the tensioned cord up or down with your other
hand.
NOTE: Do not over torque the wand. It can cause the
louvers to kick out at the bottom of the blind and cause the
louvers to look misshapen.
Open or Close Blind
Open or Close Vanes
T
ether