Hunter Douglas Paramount - Care; Removing the Headrail (if Necessary); Removing the Vanes (if Necessary); Cleaning Procedures

CARE
16
Removing the Headrail (If Necessary)
■ To remove the headrail, locate the rear tab on the mounting clip.
■ Push up on the rear tab to release the headrail.
Removing the Vanes (If Necessary)
■ Push up on the vane.
■ Gently open the vane hook by inserting a ‘credit card’ sized piece of rigid plastic between
the vane and the long prong of the vane hook.
■ Carefully remove the vane.
Cleaning Procedures
Dusting
■ Regular light dusting with a feather duster is all the cleaning that is needed in most
circumstances.
Vacuuming
■ Use a hand-held vacuum with low suction for more thorough dust removal.
Spot-Cleaning
■ Prepare a solution of warm water and a mild detergent.
■ Dampen a clean cloth in the solution and wring it out.
■ Dab the spot with the dampened cloth until it is gone.
CAUTION: Vertical fabrics should not be spot-cleaned or immersed in water.
Compressed Air
■ You can use compressed air or a hair dryer (cool setting) to blow the dust off your valance.
Tilt to
Remove
Tilt to
Remove
Rear Ta
b
Rear Tab
P
aramount
®
Headrail
PermaTrak
®
and PermAlign
®
Headrail
Push Up
Push Up