Hunter Douglas Paramount - Tools and Fasteners Needed

2
GETTING STARTED
Thank you for purchasing Hunter Douglas Vertical Blinds. With proper installation, operation, and
care, your new blind will provide years of beauty and performance.
Please thoroughly review this instruction booklet and the enclosed packing list before beginning
the installation.
NOTE: Illustrations throughout these instructions show the PermaTrak
®
headrail.
Instructions are the same for the Paramount
®
and PermAlign
®
headrails.
Tools and Fasteners Needed
■ Flat blade and Phillips screwdriver
■ Level (laser level is recommended)
■ Measuring tape and pencil
■ Power drill,
3
∕
32
" drill bit, and
1
∕
4
" hex driver
In addition, you will need fasteners designed to work with your specific mounting surface(s).
■ #6 Hex Head Screws (Provided). Two 1½" screws are provided per installation bracket.
■ Speed Nuts and Screws (Provided). Extension brackets come with speed nuts and screws.
Speed Nut
and Screw
(Provided with Each
Optional Extension Bracket)
#6 x 1½"
Hex Head Screw
(Provided)