INSTALLATION
5
Single-Tiered Open Corner (Fabric Only)
■ Cut a fabric insert long enough to wrap
around the corner and over the entire
return plus at least 1" excess at
each end.
■ Attach the corner clip and valance
returns.
■ Insert the fabric into the valance, wrap
it through the corner clip and into the
valance return.
IMPORTANT: Leave extra fabric at the other
end of the fabric insert to be able to wrap around
the other valance return.
■ Wrap excess fabric around the end of the
valance return and secure it with a valance
return clip.
■ Repeat steps 3 and 4 for the other
valance return.
Proceed to “Mount the Installation Brackets — Inside Mount” on page 7 or “Mount the
Installation Brackets — Outside Mount” on page 9 based on the mounting option ordered.
Corner
Clip
Valance
Return
Valance
Fabric
Insert
Clip
To Next Page
Loading...
