Hunter Douglas PowerView User Manual

INSTALLATION
13
Attach the Universal Valance Clips to the Headrail
With fully recessed inside or ceiling mounts, the universal valance clips must be installed
before mounting the headrail.

Attach clips 2" from each end of the headrail.

Space additional clip(s) evenly between the two end clips so that they are no more than
36" apart.

Do not place the clips where they could interfere with internal headrail mechanisms.

If desired, the valance may be positioned
1
⁄ 4 " higher by raising the clips one notch up, as
shown in the illustration below right.
Mount the Headrail
IMPORTANT: If placing the battery wand inside the headrail, follow the instructions under
“Place the Battery Wand Inside the Headrail” on page 10.

Tilt the headrail so that its back lip slides under the front lip of the end brackets and
intermediate bracket(s).

Push the headrail against the back of the end brackets.

Check that the front lip of the intermediate bracket(s) is under the front lip of the headrail.
End Bracket
Intermediate Bracket
Standard
Position
Raised Clip =
Higher Valance

Hunter Douglas PowerView Specifications

General

Control Method	Remote control, smartphone app, voice control
Connectivity	Wi-Fi, Bluetooth
Power Source	Battery-powered
Integration	Amazon Alexa, Google Assistant, Apple HomeKit
Scheduling	Yes
Scene Control	Yes
Battery Life	Approximately 1 year depending on usage
Compatibility	Hunter Douglas blinds and shades
App Features	Remote access, scheduling, scene control, integration with smart home systems