Hunter Douglas PowerView User Manual

OPERATION
18
Testing the Blind
Testing the blind with the programming button will allow you to ensure that the motor and
power source are working correctly.

Press the programmingl button on the front
side of the headrail to test operation. If the
blind does not operate, see “Troubleshooting”
on page 24.
Using the PowerView
®
Remote
First, activate the remote by pulling both plastic tabs from the back battery compartment.
IMPORTANT: If you have more than one remote, see “Adding Additional Remote(s) to the
PowerView
®
Shade Network” in the PowerView Motorization Remote Control Guide.
Programming
Button
Front of
Blind
Transceiver
Assembly
Group 1
Group 2
OPEN
Tilt slats
to open at
50% position
CLOSE
Tilt slats
to open at
50% position
Group 3
Group 4
Group 5
Group 6
Favorite
(Blind position)
LEFT ARROW
Tilt slats down to
closed position
RIGHT ARROW
Tilt slats up to
closed position
STOP
(Press and hold for
programming mode)

Hunter Douglas PowerView Specifications

General

Control Method	Remote control, smartphone app, voice control
Connectivity	Wi-Fi, Bluetooth
Power Source	Battery-powered
Integration	Amazon Alexa, Google Assistant, Apple HomeKit
Scheduling	Yes
Scene Control	Yes
Battery Life	Approximately 1 year depending on usage
Compatibility	Hunter Douglas blinds and shades
App Features	Remote access, scheduling, scene control, integration with smart home systems