OPERATION
13
UltraGlide
®
2 Click and Walk Away
TM
Shadings (Silhouette
®
Only)
To Lower the Shading and Open the Vanes
■ Pull the cord toward the center of the
shading. Listen for a “click” and then
release the cord.
■ The vanes automatically open once
the shading is completely lowered.
■ The shading can be stopped at any
point while lowering by slightly
tugging the cord straight down.
To Tilt the Vanes and Raise the Shading
■ Pull the cord straight down with long strokes.
■ With each stroke the shading partially
raises.
■ Allow the cord to retract completely into
the headrail after each downward stroke.
■ Use multiple strokes until the shading
reaches the desired position.
■ The shading can be stopped at any point
while raising.
Lower
Vanes by
Center
Tilt
Raise by
Pulling
Straight
Down
To Next Page
Loading...
Need help?
General
