What to do if Hunter Douglas SoftTouch wand detached from the activation arm?
The wand of your Hunter Douglas SoftTouch Indoor Furnishing is attached to the activation arm using a magnet and is easily reattached by touching the top of the wand to the activation arm.
What to do if Hunter Douglas vanes do not open when the shading is first operated?
If the vanes on your Hunter Douglas Indoor Furnishing aren't opening when you first operate the shading, ensure the front shading is completely lowered and the rear shade is fully raised. Try opening and closing the shading several times to help open the vanes. If needed, gently pull down on the bottom rail when the shading is fully lowered.
Why Hunter Douglas vanes do not close fully when the shading stops in the lowest position?
A small distance between the front and back fabric facings in the fully closed or open position of your Hunter Douglas Indoor Furnishing is normal. If this distance is excessive or moves over time, open the shading to its full 'vane open' position and try again.
Why Hunter Douglas shading raises from the sill when the vanes are closed?
A small gap between the sill and the bottom of your Hunter Douglas Indoor Furnishing shading is normal in the fully lowered 'vane closed' position.
General| UV Protection | Yes |
|---|---|
| Light Filtering | Yes |
| Operation | Manual |
| Light Control | Adjustable |
| Fabric Options | Multiple colors and textures |
| Material | Fabric |
| Privacy | Adjustable |
Overview of shading components and systems.
Lists necessary tools and fasteners for installation.
Outlines the four main steps for installing the shading.
Detailed steps for mounting brackets for inside/outside mounts.
Explains mounting options and window terms.
Instructions for installing the battery wand for specific systems.
Procedure for physically installing the shading into brackets.
Steps for connecting power to motorized systems.
Specific instructions for attaching the wand for UltraGlide and SoftTouch.
General sequential operation of shading components.
Specific operational steps for the UltraGlide system.
Specific operational steps for the SoftTouch system.
Specific operational steps for the PowerView system.
Addresses common operational issues and solutions.
Solutions for battery recharging and power problems.
How to adjust upper and lower limits for SoftTouch.
Steps to detach the shading from its brackets.
Guidelines for cleaning the shading and its components.
Important safety information regarding cords and children.
Regulatory compliance information for the device.
Details of the product's limited lifetime warranty.
To Next Page