Why does my Hunter Douglas Silhouette Indoor Furnishing shading not raise or lower completely?
If your Hunter Douglas Indoor Furnishing shading isn't raising or lowering fully, check that the fabric isn't catching on any brackets or window components. You may also need to adjust the upper and/or lower bottom rail travel limits.
What to do if Hunter Douglas Window Blinds will not snap into the installation brackets?
If your Hunter Douglas window blinds shading will not snap into the installation brackets, check that the installation brackets are aligned and level and that the locking tab on the installation bracket slides over the headrail.
What to do if Hunter Douglas Silhouette shading will not fit into the installation brackets?
If your Hunter Douglas Indoor Furnishing shading doesn't fit into the installation brackets, first check if a battery wand is interfering. Ensure the brackets are level and aligned, adjusting or shimming if necessary. Make sure mounting screw heads are flush against the brackets and the headrail is fully inserted, allowing the locking lever to slide over it.
What to do if vanes do not open when the Hunter Douglas Indoor Furnishing shading is first operated?
If the vanes on your Hunter Douglas Indoor Furnishing shading don't open initially, ensure the shading is fully lowered. Try opening and closing the shading several times to help the vanes adjust. If needed, gently pull down on the bottom rail when the shading is completely lowered.
Why don't the vanes align on my side-by-side Hunter Douglas Window Blinds?
Vane alignment for Hunter Douglas window blinds is only guaranteed within 1/4" when shadings are ordered at the same time, at the same height, with the same color and fabric, and specified on the order form. Check that the windows are square and the same height.
Why Hunter Douglas Silhouette Indoor Furnishing shading raises from the sill when the vanes are closed?
A small gap between the sill and the bottom of your Hunter Douglas Indoor Furnishing shading is normal when the vanes are closed, this allows the bottom rail to move freely. However, if the gap is excessive or changes over time, adjustments may be needed.
How to fix an uneven center gap in Hunter Douglas Two-On-One Headrail Window Blinds?
If the center gap of your Hunter Douglas Two-On-One Headrail window blinds is not even from top to bottom, ensure the entire length of the headrail is straight and level. If the center is higher, the gap will close; if lower, it will increase. Adjust the height of each bracket by moving it within the screw slots or using shims if necessary.
Why are my Hunter Douglas Window Blinds hard to raise or lower?
If your Hunter Douglas window blinds are hard to raise or lower, or will not raise or lower, and they are an inside mount, ensure there is enough clearance between the ends of the shading and the window casement. For EasyRise™ models, verify the universal cord tensioner is correctly mounted by pulling down on the spring to relieve tension and pulling the tensioner to the bottom of the cord loop, then properly mount it according to the included instructions. Also, check that the installation brackets are level and use shims to level them if necessary.
What to do if the universal cord tensioner grabs onto the cord upon operation of Hunter Douglas EasyRise Window Blinds?
If your Hunter Douglas EasyRise window blinds' universal cord tensioner grabs the cord during operation, ensure the universal cord tensioner is properly mounted. Reinstall if needed.
How to fix Hunter Douglas Window Blinds that raise or lower unevenly?
If your Hunter Douglas window blinds raise or lower unevenly, or the bottom rail is uneven when fully raised, check if the window is square by measuring the diagonals and ensure the installation brackets are level. Use shims to level if necessary.
General| Material | Fabric |
|---|---|
| Light Control | Adjustable |
| UV Protection | Yes |
| Operating Systems | PowerView Motorization |
| Available Widths | Up to 144 inches |
| Privacy | Adjustable |
| Vane Sizes | 2 inches |
| Customization | Yes |
To Next Page