Hunter ECO LOGIC

Instructions AWS – Hunter model
How to use the eco-logic controller
• Use the mode button to advance through the programming functions.
• Use the arrows to move about the different fields within a function and the plus and minus
button to change the value that's currently flashing.
• The PRG button is used to advance from program A to program B and program C.
Set the current date and time
• Press the mode button on and the year will start flashing
• Use the left and right arrow buttons to scroll through the different choices. Tapping the right
arrow button once will show the month.
• Use the minus and plus button to change to the current month.
• Use the right arrow button to sellect the correct day.
• By tapping the plus (+) button you can switch to a.m./p.m. or 24-hour mode.
• When you come back to the years that’s a complete cycle. You can use the mode button to
go back to the home screen, which shows the current timer.
Set the automatic water refreshment
A program is a group of stations that share the same watering schedule. By schedule we mean
watering days of the week on which the program will run as well as the number of times the program
will cycle per watering day. If all your stations will be watering in the same days and the same
number of times a day then you can program all your stations in the same program, which we
strongly advice.

Hunter ECO LOGIC Specifications

General

Type	Irrigation Controller
Programs	3
Start Times Per Program	4
Maximum Station Run Time	4 hours
Sensor Compatibility	Rain sensor compatible
Mounting	Indoor/Outdoor
Warranty period	2 years
Backlit LCD Display	Yes
Cycle + Soak	Yes
Manual Start	Yes
Zones	6
Stations	6
Run Time	1 minute to 4 hours
Watering Schedule	7-day, interval, odd/even
Power Source	External transformer
Voltage	120V AC
Water Budget	10% to 150%
Battery Backup	Yes

Summary

Using the Eco-Logic Controller

Controller Button Functions

Explains the function of the Mode, Arrow, PRG, Plus (+), and Minus (-) buttons for navigation and value adjustment.

Setting the Current Date and Time

Date and Time Adjustment Process

Guides on setting the year, month, day, and 12/24-hour mode using controller buttons.

Automatic Water Refreshment Setup

Program Configuration

Defines a program as stations sharing a watering schedule, including days and cycles.

Programming Start Times

Details setting three different start times for Program A, with recommended values.

Setting Station Runtimes

Instructions on programming the watering duration for individual stations.

Setting Watering Days

Daily Watering Schedule

Explains how to set watering days for the week, activating each day sequentially.