Standard Accessories for Quick-Thread
®
A. 106-82-2 Sleeve, Scratch Guard for Small Cup
B. 175-353-1 Polymer Cup (4.5” O.D.)
C. 76-433-3 Quick Take-Up Wing Nut with Handles
D. 221-658-2 Hammer Heads (4)
E. 46-320-2 Spacer
F. 221-589-2 Weight Hammer/Pliers
G. 221-659-2 Adhesive Weight Scraper
H. 223-68-1 Pressure Ring
I. 65-72-2 Calibration Weight
NOTE: Hunter wheel balancers do not include a standardized set of
mounting adaptors.
For optional accessories, refer to Wheel Balancer Brochure, Form 3203T.
Standard Accessories for Optional Auto-Clamp™
Kit 20-2077-1
A. 106-82-2 Sleeve, Scratch Guard for Small Cup
B. 175-353-1 Polymer Cup (4.5” O.D.)
C. 184-81-1 Auto-Clamp Hub Assembly
D. 221-658-2 Hammer Head Protectors (4)
E. 46-320-2 Spacer
F. 221-589-2 Weight Hammer/Pliers
G. 20-1650-1 Rim Tags
H. 221-659-2 Adhesive Weight Scraper
I. 223-68-1 Pressure Ring
J. 65-72-2 Calibration Weight
NOTE: Hunter wheel balancers do not include a standardized set of
mounting adaptors.
For optional accessories, refer to Wheel Balancer Brochure, Form 3203T.
GSP9200 Series Wheel Balancer Operation Instructions 1. Getting Started
9
To Next Page
Loading...