Hunter GSP9200 Series - Real-Time Predictions with Rimscan and Smartweight

Real-Time Predictions with RimScan and SmartWeight
®
Once dimensions are measured, the balance screen will display the corrective weight
required and the SmartWeight
®
static and couple forces, along with the RimScan
display identifying the weight location. If a single corrective weight is required
RimScan and SmartWeight
®
work together to further reduce the amount of weight
used.
Select “Set Dimensions” to illustrate RimScan profile. If the weight location cannot be
achieved or is undesirable, turn the control knob to change the weight position. As
the position changes, the SmartWeight
®
force graphs will display a prediction of the
force results corresponding to the weight.
50
x
4. Balancing Features and Options GSP9200 Series Wheel Balancer Operation Instructions