70
6. Calibration and Maintenance GSP9200 Series Wheel Balancer Operation Instructions
Any necessary repair or maintenance should be done by the factory only. The
HammerHead™ TDC Laser System has no field serviceable parts.
The unit should never be opened or modified.
6.6 Mounting Cone Maintenance
Keep the mounting cones clean and lubricated. Lubricate with a coating of light
lubricant with Teflon
®
such as Super Lube
®
by Loctite.
Do not use cones in any way that is not described in this operation manual. This
could cause damage to the mounting cone and not allow for proper mounting of the
wheel.
To Next Page
Loading...