Hunter GSP9200 Series - Setting Dimensions with Rimscan

96 pages

To Next Page

To Previous Page

Setting Dimensions with RimScan

Select “Balance” from the main screen and install the wheel on the spindle.

NOTE: For mixed weights, first move the inner Dataset

arm in the

UPWARD position to the clip-on weight location and tap foot

pedal to measure the distance and diameter dimensions prior

to performing RimScan.

To initiate RimScan, pull the inner Dataset

arm away from the weight tray and turn

to the down position.

GSP9200 Series Wheel Balancer Operation Instructions 4. Balancing Features and Options