RimScan is compete. Select “Balance to continue to the balance screen. After a scan
is performed the profile will appear on the balance screen.
The user has the ability to change corrective weight location(s). Select “Move Weight”
and change weight position with the Control knob. Push the control knob to switch
between left and right weight planes.
Select “Find Best Location” to let the balancer decide what is the optimum corrective
weight location. If by chance the user-selected weight positions are unacceptable,
“Find Best Location” will return the weights to the optimum positions.
GSP9200 Series Wheel Balancer Operation Instructions 4. Balancing Features and Options
49
To Next Page
Loading...