Hunter H33 - Page 205

Hu
nt
e
r
33
• M
a
int
e
n
a
n
ce
14.1
3
33
A AFT LIFTING POINT (INDICATED BY DECAL)
PLACEMENT IS ALIGNED WITH INTERIOR
STRUCTURAL SUPPORT PROVIDED BY
BULKHEADS. ALSO BE SURE YOU ARE WELL
FORWARD OF PROP SHAFT.
B FWD LIFTING POINT (INDICATED BY DECAL)
PLACEMENT IS FWD OF CHAINPLATE SO AS
TO ALIGN WITH INTERIOR STRUCTURAL
SUPPORT PROVIDED BY FWD SALON
BULKHEAD.
RUBRAIL
14” X 4” X 4”
LIFTING STRAP
HULL SIDE
NOTE: TO AVOID DAMAGING THE RUBRAIL WHEN LIFTING
THE BOAT, A 14” PIECE OF 4” X 4” WOOD SHOULD BE
PLACED IN BETWEEN THE LIFTING STRAP AND THE HULL,
JUST BELOW THE RUBRAIL
Exterior Lifting Points ( Stern Drive)
g( )