Hunter Hydrawise Ready - Page 40

!
Page 40
RC-024 Version 2.01
REPORT NAME
DESCRIPTION
Flow Rates (per minute)
If you have a flow meter installed, this report shows
instantaneous flow rates each time the controller records
flow.
Hover over any dot to see the flow rate and number of
zones active at the time.
Sensor Levels
If you have a rain sensor, moisture sensor or any other
‘level’ based sensor configured this report will show the
historical status of your sensor (open or closed).
Smart Water Balance
Shows the irrigation balance for each zone on a given day.
Also shows the minimum and maximum irrigation balance
over the report period.
You can click on the zone names at the bottom of the
report to show their information in the report or exclude it.
Hover over the graph to see information on
evapotranspiration, rainfall and irrigation amounts.
Monthly Evapotranspiration and
Rainfall
Shows the historical ET and rainfall in your area. This data
is based on a 12 year average.
Monthly Temperature and Rainfall
Shows the historical temperature and rainfall in your area.
This data is based on a 12 year average.
!