Solar Sync still sending Seasonal
Adjust when Controller Bypass
switch is in the 'Bypass" position
Solar Sync's automated Seasonal
Adjustment cannot be de-activated
by the Bypass switch. The Bypass
switch only controls the Rain/Freeze
shut off function of the Solar Sync
After removing the Solar Sync
sensor from the controller the
seasonal adjust value cannot be
changed manually
The Solar Sync sensor need to he
uninstalled if permanently removing
it from the controller
After removing the Solar Sync
sensor from the controller turn the
knob to Solar Sync Settings. The
screen should show dashed lines.
The sensor is now uninstalled.
Solar Sync sensor has been
disconnected from controller but is
not uninstalled
Check Solar Sync sensor wiring
connection to controller
Wiring connection from Solar Sync
connection is faulty
Uninstall Solar Sync sensor if
permanently removing it from the
controller
To Next Page
Loading...
