FILE MANAGER
SECTION 3.8
3.8.4
3,8.5
VER.V09F
EXITING I CONT I
To escape from 'CONT' press (control C) and hold down, then
power up. HUNTER will bleep twice and then wait for the escape
code to be entered (default code 56580), Failure to enter the
correct code will result in a bleep from HUNI'ER and continuation
of the program, If the code is entered correctly then HUNTER
will power down immediately, The next power up will revert to
the operating system in the normal way, When continuing a .HBA
file it is possible to escape from the program by pressing 'ESC'
and entering the escape code.as above.
!'GIER LOSS
If power loss occurs by removing the batteries, the !'ext power
up will cause HUNTER to reload the file that was being run and
execute the program from the start.
Power loss can also be caused by excessive shock, battery
failure, nuclear effects or other means.
PAGE 3 - 60
To Next Page
Loading...