BASIC PROORAHMING
SECTION 4.12
4, 12. 1
4, 12.2
4.12,3
4, 12.4
4, 12.5
VER.V09F
AUTO POWER FEATURE
Basic supports several powerful functions associated with the
POWER key. Basic programs can control precisely what occurs on
switch on, or even not allow HUNTER to be turned off, The
following commands and statements are available:
ON POWER GOTO
ON POWER RESUME
POWER CONT
POWER n
POWER OFF
POWER OFF RESUME
DEFAULT CONDITIONS
The power key behaves as normal - at any stage it can be used to
turn HUNTER on or off, The current execution position is lost
on turning the power off, and turning it back on returns to the
File Manager, However the current Basic program and variables
are retained,
PG/ER CONT
a) The power key is disabled,
b) The automatic timeout power down (if no key is pressed within
a set period of time) is disabled,
IWERn
a) This corrmand overrides a previous POWER OFF,
b) n refers to the automatic power down timeout:
1) n must be in the range 10-255 or 0
2) ri=O is no automatic timeout
3) n is in mutiples of 5 seconds
PG/ER OFF
a) Tums the power off,
b) When power is turned on, Basic program execution starts at
the beginning.
PAGE 4 - 42
To Next Page
Loading...