BASIC FUNCTIONS
SECTION 5.4
5.4.11 Function CRT causes HUNTER to treat the serial port as the display
and keyboard rather than the internal LCD display and
keyboard.
Syntax CRT
Examples CRT
Remarks CRT sets keyboard and display functions to the RS-232 port.
VER.V09F
The command is useful for entering programs quickly also
characters not on HUNTER's keyboard may be used,
Any standard VDU may be used, Baud rates and other
parameters are set on HUNTER using 'Initialise
Communications'.
Remember that a 'crossed' RS-232 lead is needed with
GND,RXD and TXD circuits installed,
PAGE 5 - 20
To Next Page