BASIC FUNCTIONS
SECTION 5. 16
ON POWER
5.16.8 Function ON POWER allows the programmer to trap and_vector program
execution if a user presses the power off key.
Syntax ON POWER Garo [line no]
or
ON POWER OFF
Examples ON POWER Garo 1000
Remarks This statement causes the OFFVECT locations to be loaded
with a vector so that if operation of the power down key is
detected, program execution occurs from the line number
specified.
VER.V09F
Operation of the break key, or a syntax error, will cause
the vector to be re-initialised to enable the power on/off
switch to function normally.
ON POWER OFF
This statement also re-initialises the OFFVECT location.
PAGE 5 - 95
To Next Page