BASIC FUNCTIONS SECTION 5. 16
ON TIME$
5.16.10 Function ON TIME$ specifies a routine to be executed at·'a defined
time.
Syntax
ON TIME$ = A$ GOSUB line number
A$ is a string defining the interrupt time
Exanple 10 ON TIME$ =
11
12:00:00
11
GOSUB 1000
Remarks The executing program will be interrupted at the specified
time and execution will begin again in the subroutine
beginning at 'line number'.
VER.V09F
The time is checked at the beginning of a new statement,
therefore if Basic is waiting on an input, for example, the
interrupt will not occur immediately.
NOTE: ON TIME$ is only effective when HUNTER is powered up.
PAGE 5 - 'R
To Next Page