BASIC FUNCTIONS
SECTION 5.17
'
POWERn
5, 17, '/ Function PCMER n auto power off period,
Syntax
POWER n
n is in the range 10-255 and is the number of 5 second
periods,
Examples POWER 12
will switch HUNTER off after min.
POWER 0
will prevent timed switch off,
Remarks POWER O will enable the power off key after POWER CONT has
been executed,
VER.V09F
To remind the user that HUNTER has been left switched on,
HUNTER will emit a bleep every 150 seconds, Power n is
reset to the default value (n=60, or 5 minutes) after power
off/on and should be re-initialised by the user's program.
PAGE 5 - 107
To Next Page