BASIC FUNCTIONS
SECTION 5. 17
POWER OFF
5.17.9 Function IWER OFF switches HUNI'ER off
Syntax
POWER OFF
Examples POWER OFF
Remarks After POWEil OFF. has been executed switching HUNTER on will
automat,;i,s);;illy run the program from the 1}tart. ,-
VER.V09F·
To exit from POWER OFF press 'Esc' and enter the code
56580.
· Power off is used in applications whe~e 'Cont filename'
could give confusing results if the unit is left in an
uncontrolled state by a previous user.
PAGE 5 - 109
To Next Page