BASIC FUNCTIONS
SECTION 5.24
,. ,.-, -- . -
WAND -_:
-- -
5,24,1 Function WAND selects the bar code decoder to use,
Syntax WAND:n
Example WAND = 0
selects the CODE 39 decode software,
Remarl<s HUNTER can have multiple bar code decoder packages loaded,
This command selects the active decoder,
VE;~. V09F
Currently implemented are:
0 - Code 39
1 - EAN 8/13
NOTE: It is essential to have the relevant decoder software
loaded in the factory prior to attempting to use a wand.
See section 8, 5 BAR CODES AND LIGHT PENS for further
information.
PAGE 5 - 146
To Next Page