CCJ1MUNICATI0NS SECTION 6.4
6.4. 12 SERIG (Receive channel only)
VEii:.. V09t
The SERIG location (see section 9,7, page 9-38) allows any
single character in the range O -
127 Decimal ('0' - '7F' Hex)
to be ignored by HUNTER's serial data reception system.
Characters rejected by SERIG are not entered in the
communications buffer or passed to user programs.
SERIG is provided for use with computer systems that provide
abundant spurious characters (e.g. XON or DEL) as part of data
streams. Since filtering these unwanted characters can be
inconvenient in user programs, SERIG provides a useful solution.
The value of SERIG is selected by incrementing/decrementing the
decimal value using the up/down cursor keys and
must be set to
'OFF' when not in use. Serig-off is obtained by incremenLing
past
127 or below 0,
PAGE 6 - 10b
To Next Page
Loading...