HUNTER OPERATION
SECTION
2.7
VER.V09F.
If the connector won't fit easily, it probably won't fit at all.
FIND OUT WHY
HUNTER 's communication format is usually set up by its
applications program for specific situations, and does not
require operator attention.
Sometimes, a user program will present a 'menu' selection for
operator choice, In this event, selection of the desired
communications mode will automatically set the communications
parameters without further action.
Communications parameters can also be set manually. A.n internal
program, 'COMMUNICATIONS PARAMETERS', can be accessed or called
by a user application program. See Part 6 COMMUNICATION, for
details.
PAGE 2 - 18
To Next Page
Loading...