FILE MANAGER
3.4.3. 15 COMMAND
EXPLANATION
EXAMPLES
REMARKS
VER.V09F
SECTION 3.4
SEND
SEND filename [Al
Outputs files via the serial port.
To output a file in 8-bit format:
>SEND DEMO.COM
To output an ASCII file to, say, a printer:
>SEND LETTER.TXT A
To output in Intel Hex format, first LOAD the
file into .the execution RAM page O, then type:
SEND n
n is the number of 256 byte blocks required to
be sent.
To transmit in 8-bit format, remember to set the
communication parameters correctly i.e. Parity
to 8-bit and SERIG to off.
Transmission can be aborted with the 'ESC' key.
The only real difference between 8-bi t format
and ASCII dumping is that transmissions cease on
the first occurence of the end of file character
'control Z' (1A Hex) in the file.
NOTE: If transmitting, using 8-bit data format,
a .COM or a HUNTER.HBA file, the LF option in
the communications menu
MUST be turned off to
prevent the insertion of LF characters following
CR characters, possibly corrupting the object
code file being received.
NOTE: SEND cannot transmit a file whose name
begins with a numeric character and will return
a Syntax error. Rename the file using REN
first, or use Hex format.
PAGE
3 "- 27
To Next Page
Loading...