Englsih - 6
1�4 Software
The behaviour of Husqvarna’s Automower® 305 robotic
lawnmower is controlled by microprocessors and
software. There is an MSW-program (Main SoftWare),
an MMI-program (Man Machine Interface) and a SSW-
program (Subsystem SoftWare).
The main program (MSW) interprets the signals from
the sensors and controls the operation accordingly.
The MMI-program checks the presentation of informa-
tion in the display and the inputting of, for example, key
strokes on the keypad. The MMI-program contains the
texts that are shown in the display.
The SSW-program controls the blade motor, among
other functions.
This Technical Manual for the Automower® 305 deals
with version 1.00.00 of the main program and 1.10.00
of the MMI-program.
1�4�1 Ascertaining the program version
1. Set the main switch to position 1.
2. When the start page is displayed: Keep the
button 0 pressed in for two seconds to go to
Quick Check.
3. Select Info and press OK.
4. Select General and press OK.
5. The main program’s version is indicated on the
line that starts MSW ver:, e.g. 1.00.00.
The MMI-program’s version is indicated on the
line that starts MMI ver:, e.g. 1.10.00.
The SSW-program’s version is indicated on the
line that starts SSW ver:, e.g. 1.00.00.
6. Keep the Arrow back button pressed in for two
seconds to leave Quick Check and go to the
main menu.
It is important that Automower® 305 is
programmed with the latest versions of
the programs. Husqvarna is continuously
improving the mower’s behaviour and
performance, which results in new versions of
programs.
Version of MSW-program
Control box
from year
Version of MSW-program
2011 1.00.00
Version of MMI-program
MMI-card from
year
Version of MMI-progra
m
2011 1.10.00
Version of SSW-program
Control box
from year
Version of SSW-progra
m
2011 1.00.00
1� FUNCTION
Software type: 305
MSW ver�: 1�00�00
Date: 2011-01-24
MMI ver�: 1�10�00
SSW ver�: 1�00�00
3020-001
To Next Page
Loading...
