Husqvarna AUTOMOWER 310 MARK II User Manual

Note: If Avoid collisions with mower is selected it
can result in grass that is not cut around the charging
station.
3.12.9.4 Terrain kit
When using the terrain wheels with weights, special
settings are needed to compensate for more weight.
To set the Terrain kit
1. Do steps 1–3 in To get access to the menu in the
display of the product on page 21 .
2. Use the arrow buttons and the OK button to move
through the menu structure
Accessories > Terrain
kit > Enable Terrain kit .
3. Push the OK button to enable or disable the
function.
4. Push the BACK button.
3.12.9.5 FlexiFence
If you install the FlexiFence accessory, you must enable
the Zone generator function of the product.
3.12.9.6 To enable the Zone generator function
1. Do steps 1–3 in
To get access to the menu in the
display of the product on page 21 .
2. Use the arrow buttons and the OK button to move
through the menu structure
Settings > Installation
> Zone generator .
3. Push the OK button to enable
Zone generator .
4. Push the BACK button.
30
- Installation 1462 - 007 - 14.03.2022

Husqvarna AUTOMOWER 310 MARK II Specifications

General

Cutting width	22 cm
Cutting height, min-max	20-50 mm
Battery type	Li-ion
Typical charging time	60 min
Typical mow time on one charge	70 min
Sound level perceived	59 dB(A)
Maximum slope performance inside installation	40%
Working area capacity	1000 m²
Cutting system	3 pivoting razor blades
Weight	9.4 kg
Battery voltage	18 V
Battery capacity	2.1 Ah
Maximum area capacity	1000 m²
Noise level	59 dB(A)
Weather resistance	Yes
Security features	PIN code, alarm
Connectivity	Bluetooth
Maximum slope	25% (14°)