English - 7
1. INTRODUCTION AND SAFETY
1.3 Symbols in the Operator’s Manual
These symbols can be found in the Operator’s Manual.
Study them carefully so you understand their
significance.
• Inspection and/or maintenance must be carried
out with the main switch set to OFF.
• Always wear protective gloves when working
with the mower’s underframe.
• Never use a high-pressure washer or even
running water to clean Automower.
• A warning box indicates a risk of personal injury
exist, especially when the stated instructions are
not followed.
• An information box indicates a risk of material
damage exist, especially when the stated
instructions are not followed. The box is also
used where there is a risk of user error.
OFF
To Next Page
Loading...
Need help?
General
