M.34
TE 250 - 310 2012 I.E. / TE 250 - 310 2012 I.E. USA
TC 250 2012 - TC 250 2012 I.E. USA
TXC 250 - 310 2012 I.E. USA
ELECTRICAL SYSTEM
Workshop Manual Ed. 12-2011
Fuses (TE-TXC)
• When you nd a blown fuse (1), always investigate and eliminate the
cause before replacing it.
• Never replace a fuse with another fuse with a different rating.
• Never use a wire or other makeshift repair techniques instead of installing
a new fuse.
Semiconductor parts
• Be careful to never drop parts that incorporate a semiconductor, such as
the ECU or the voltage regulator/rectier.
• Closely follow the relevant instructions when inspecting these parts. An
improper procedure may lead to severe damage.
To Next Page
Loading...
Need help?
General
