Husqvarna TE 250-310 2012 I.E. User Manual

D.20
TE 250 - 310 2012 I.E. / TE 250 - 310 2012 I.E. USA
TC 250 2012 - TC 250 2012 I.E. USA
TXC 250 - 310 2012 I.E. USA
SETTINGS AND ADJUSTMENTS
Workshop Manual Ed. 12-2011
Air lter check (TC)
Turn the rear xing (1) counter clockwise, remove it and extract the saddle re-
leasing it from the front retaining screw.
Remove the screw (3), remove the complete air lter (4) and separate lter (5)
from rear chassis (6).
Air lter cleaning
Wash the lter with a specic detergent (see "Capacities" table in Section A)
then dry it fully (wash lter with gasoline only in case of need). Plunge the lter
in special oil for lters (see "Capacities" table in Section A), then wring it to drain
superuous oil.
Do not use fuel or a low ash-point solvent to clean the ltering
element. A re or explosion could result.
Clean the ltering element in a well ventilated area and do not allow
sparks or ames anywhere near the working area.

Husqvarna TE 250-310 2012 I.E. Specifications

General

Brand	Husqvarna
Model	TE 250-310 2012 I.E.
Category	Motorcycle
Language	English