Husqvarna TE 250-310 2012 I.E. User Manual

E.16
TE 250 - 310 2012 I.E. / TE 250 - 310 2012 I.E. USA
TC 250 2012 - TC 250 2012 I.E. USA
TXC 250 - 310 2012 I.E. USA
H00648
2
H02339
GENERAL PROCEDURES
Workshop Manual Ed. 12-2011
Fuel pump removal (TC)
- Remove the fuel tank as described in the relevant paragraph.
- Remove the tank ller cap and pour the fuel contained in the tank into a ves-
sel of adequate capacity.
- Use an Allen wrench to loosen the 6 screws (1) and remove the pump (2).
On assembly, make sure that the pump O-ring (3) is correctly po-
sitioned in its seat.

Husqvarna TE 250-310 2012 I.E. Specifications

General

Brand	Husqvarna
Model	TE 250-310 2012 I.E.
Category	Motorcycle
Language	English