HUSTLER SmoothTrak Super S - Technical Specifications

606834CE 7-1 REV A
CZ
DA
DE
EN
ES
FR
IT
NL
PT
SV
TECHNICAL SPECIFICATIONS
Hustler
®
Super S
®
Guaranteed
Sound
Power Level Operator Ear
* Engine
RPM
** Vibration
(Maximum weighted
acceleration m/s2 -
whole body)
Machine
Mass
Nominal
Engine
Power
Cutting
Width
Model No. dBA dBA RPM
m/s
2
kg kW cm
938803CE 100 86.1 2650 (± 50) 2.05 419 10.7 91
938811CE 105 89.8 3050 (± 50) .81 489 15.7 122
Sound
Measurements
(dBA)
Sound Power per Hemisphere method (ISO 3744 - 1994 & 11094 - 1991)
* IMPORTANT:
Never alter or tamper with the engine speed (RPM) settings.
** Whole Body
The RMS acceleration in m/s² is measured for 3 minutes on a representative machine. The acceleration value depends
upon the roughness of the ground, the speed at which the mower is operating and the operator driving habits. Measure-
ments were obtained through actual field data according to STD Procedure in ISO 2631-1-1997.
Hand/Arm
These values were obtained through hand/arm measure per ISO 5349-1-2001.
Model No.
938803CE The RMS acceleration in m/s² measured in 24 seconds is less than 2.5 m/s².
938811CE The RMS acceleration in m/s² measured in 24 seconds is less than 2.5 m/s².
Test was performed on a static (stationary) machine.