To Next PageTo Next Page
Need help?Do you have a question about the HWH SPACEMAKER and is the answer not in the manual?
General| Brand | HWH |
|---|---|
| Model | SPACEMAKER |
| Category | Automobile Accessories |
| Language | English |
Ensure clear space during operation and avoid contact with hydraulic leaks for safety.
Wear safety glasses when inspecting or servicing the system to prevent eye injury.
First, notify the dealership where the vehicle was purchased for problem resolution.
If the dealer cannot resolve the issue, contact HWH Customer Service with vehicle and problem details.
Layout and components of the hydraulic room extension control panel, including key and control switches.
Function of the key switch in enabling or disabling room extension system power.
How to use the momentary room control switch to extend or retract the room.
Advises on pump motor run time limits and mandatory 30-minute cooling periods to prevent damage.
Details on how different systems monitor pump run time and variations in protection mechanisms.
Information on the lighted reset switch and operational advice for cold weather conditions.
Guidelines for safe operation and essential steps for preparing the vehicle for travel.
Step-by-step instructions for extending the room, including safety warnings and mechanism specifics.
Step-by-step instructions for retracting the room, including safety warnings and mechanism specifics.
Procedure for manually retracting rooms in case of hydraulic failure, emphasizing safety and component handling.
Steps to lower the floor using the pressure control valve and splined shaft before room retraction.
Detailed steps for retracting the room using threaded rods, including turn counts and cautionary notes.
Instructions for manually retracting 'straight out' room extensions using threaded rods and valve adjustments.
How to operate the auxiliary hand pump for extending or retracting landing gear, jacks, or room extensions.
Instructions on opening solenoid valves and adjusting release cams for auxiliary hand pump functionality.
Step-by-step guide to prime the auxiliary hand pump by opening and closing specific solenoid valves.
Hydraulic line connections for Room 1 (Level In/Out) and Rooms 2 & 3 (Straight Out) systems.
Detailed view of hydraulic lines, hoses, and connections for the Universal Level In/Level Out Room 1.
Detailed view of hydraulic lines, hoses, and connections for the Universal Straight Out Rooms 2 and 3.
Hydraulic line connections for Rooms 1 & 3 (Level In/Out) and Room 2 (Straight Out) systems.
Detailed view of hydraulic lines, hoses, and connections for Universal Level In/Level Out Rooms 1 and 3.
Detailed view of hydraulic lines, hoses, and connections for the Universal Straight Out Room 2.
Wiring diagram for room extension manifold connections, detailing solenoid functions and pin assignments.
Electrical diagram showing pump relay connections for multiple room extensions, including fuse and park brake wire integration.
Wiring details for the room control panel, including connection information for key switch, control switch, and panel connectors.
Identification of solenoid valves with cam release, 1/4" nut release, and T-handle release mechanisms.
Instructions on how to manually operate solenoid valves, including turn limits and precautions.
