addition, the screen shots and descriptions used throughout this manual refer to the
functionality that was available within the logger samples used. This can vary from
device to device. Therefore, always refer to the IDT screens to determine which
features are available on your device.
HWM provides support of the logger devices by means of our customer support
webpages: https://www.hwmglobal.com/help-and-downloads/
Should you have any questions that are not covered by this manual or online help,
please contact the HWM Technical Support team on +44 (0) 1633 489479,
or email cservice@hwm-water.com
1.2. SAFETY CONSIDERATIONS
Product certification is dependent on model supplied; please check the product labels
for the following approvals marks:
Safety Note:
Before continuing, carefully read and follow the information in the “Safety Warnings and
Approvals Information” document supplied with the product. This provides general
safety information. Retain all documents for future reference.
Before using this product:
• Make a risk assessment of the installation site and expected work activity.
• Installations should be carried out by appropriate technicians with suitable training.
• Ensure suitable protective clothing is worn and working practices are followed
during installation and maintenance.
• Check with the site owner or supervisor for any additional safety requirements
before commencing work.
1.3. OPERATING TEMPERATURE
Refer to the product’s Datasheet or your sales representative for guidance on the
storage and operating temperature range of the device. Ensure the unit is within the
operating temperature range prior to installation.
To Next Page
