HWM MULTILOG 2 - Page 8

5
MAN-147-0017-A
Select the security level that you require for your work activity. To check and modify
settings, a security level of ‘Full Access’ should be chosen.
Once selected, enter the password for the chosen level, and then click on the ‘OK’
button.
The default passwords are:
SECURITY LEVEL:
DEFAULT PASSWORD:
Read Configuration
User
Read Configuration, Read & Upload Logged Data
Operator
Full Access
Admin
(These can be changed from within the WITS Master Station).
Figure 2. Security Passcode Entry. Select a security level
Figure 3. Security Passcode Entry. Enter the password