8.1
SECTION 8 - SPECIFICATIONS
S20P Bandsaw Specication List
S-20P BANDSAW SPECIFICATIONS
Capacity - 90º
rectangular 13” (355mm) high x 18” (457mm) wide
round 13” (330mm) dia
Capacity - 45º
rectangular 13” (355mm) high x 10.9” (277mm) wide
round 12” (305mm) dia
Capacity - 60º
rectangular 13” (355mm) high x 7.3” (185mm) wide
round 8” (203mm) dia
Blade
Length 14’-10” (4521mm)
Width 1” (25.4mm)
thickness .035” (.89mm)
Blade Tension
Manual
Blade Speed VFD 46 - 328 sf/min (14 - 100 m/min)
Blade Guides Pre Set carbide inserts
Blade Wheel Dia. 17 3/4” (451mm)
Drive
blade drive 3 hp (2.2kW)
hydraulic pump drive 1/2 hp (0.37 kW)
Hydraulic System 400 PSI (2758 kPa)
Hydraulic Tank Capacity 0.66 U.S. Gallons (2.5 Liters)
Coolant Tank Capacity
6 U.S. Gallons (23 Liters)
Coolant Pump
2.4 U.S. Gal. / min (9.2 Liters/min)
Table Height 31” (787mm)
Machine Weight 1800 lbs (817 Kg)
Machine Workload 5000 lbs (2268 Kg)
Overall Dimensions 97” (2464mm) Wide, 84” (2134mm) Long, 55” (1397mm) High
Options
Full capacity bundling
Work light
Variable vise pressure
Out of stock switch
Material stop
To Next Page
Loading...
Need help?
General
