Cleaning Information: 3-4
CLEANING TOOL TIPS
Wands
With a wand, keep cleaning strokes short, front to back, and run a “dry pass”.
After pulling the wand for a strip of 3 or 4 ft long with the solution trigger activated, go back
up to the top of the stroke, and make a “dry “ pass [i.e. no solution owing]. This gives the
wand a second chance to pick up the solution on the carpet.
If you do not run a dry pass, the carpet can take longer to dry, and, possibly, the pad under
the carpet can become saturated.
Be aware of the carpet seams; try to use strokes that are parallel with the seam. Avoid
pulling the wand across the seam. Every stroke can peel the seam connection and pull
the carpet o the oor.
Also, tilt the wand handle down [head up] to move the tool forward, and away from you,
on the carpet. This means less pull on the carpet and less work for you.
To Next Page
